Traditional Picnic Table Kit

DesignWood Treated wood

• After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
• If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
• Use recommended treated wood hardware.
• Pre-drilling is recommended to avoid splitting.
• Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
• Contact with aluminum is not recommended.
• Treated Wood products found in Hardware stores are meant for above ground use only.
• Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

• Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
• After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

• After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
• Use recommended treated wood hardware.
• Pre-drilling is recommended to avoid splitting.
• Contact with aluminum is not recommended.
• Treated Wood products found in Hardware stores are meant for above ground use only.
• It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.