logo

Spindle

Traditionnal Spindle

Caracteristics

Dimensions :
2″ x 2″ x 36″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Colonial spindle 1 ½”

Caracteristics

Dimensions :
2″ x 2″ x 36″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Baluster Bevelled 2 End 1 1/8×1 3/8

Caracteristics

Available in the following dimensions:

  • 2″ x 2″ x 36″
  • 2″ x 2″ x 42″
  • 2″ x 2″ x 48″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Baluster Bevelled 2 End 1 3/16×1 7/16

Caracteristics

Available in the following dimensions:

  • 2″ x 2″ x 36″
  • 2″ x 2″ x 42″
  • 2″ x 2″ x 48″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Baluster Bevelled 2 End 1 ½ x 1 ½

Caracteristics

Available in the following dimensions:

  • 2″ x 2″ x 36″
  • 2″ x 2″ x 42″
  • 2″ x 2″ x 48″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product