Shingle
Advantages of Cedar Shingles
- Durable (will not rot)
- Aesthetics
- Sound proof
- Insulation
A Grade Shingle
Caracteristics
Clear of all nodes shingle
- Recommanded for roofing and mural
- Lenght : 16’’
- Width from 3 3/8’’ to 12’’
- Thickness : 3/8’’
Recommandations :
- Before installation, keep shingle dry and away from ground contact
- Left natural, shingle will eventually turn gray
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
B (Wall) Grade Shingle
Caracteristics
No visible nodes once installed
- Recommanded for wall
- Length : 16″
- Width : from 3 3/8″ to 12″
- Thickness : 3/8″
Recommandations :
- Before installation, keep shingle dry and away from ground contact
- Left natural, shingle will eventually turn gray
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
SHIM, 9/9 AND 10/10 SHINGLE
Caracteristics
- Perfect for doors and windows installation
- Lenght : 16″
Recommandations :
Before installation, keep shingle dry and away from ground contact
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
C Grade Shingle
Caracteristics
Visible Nodes
- Mural recommended shingle
- Length: 16″
- Width: from 3 3/8″ to 12″
- Thickness: 3/8″
Recommandations :
- Before installation, keep shingle dry and away from ground contact
- Left natural, shingle will eventually turn gray
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
-
Important documents
Limited lifetime warranty ACQ