Archives des Patio accessories

6″ Post cap

Caracteristics

Dimensions : 6″ x 6″ x 2″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

5″ Post cap

Caracteristics

Dimensions : 5″ x 5″ x 1″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Colonial Ball

Caracteristics

Dimensions :
4″ x 4″ x 6″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Williamsburg Ball

Caracteristics

Dimensions :
4″ x 4″ x 6″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Canadian Ball

Caracteristics

Dimensions :
4″ x 4″ x 6″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Windsor Ball

Caracteristics

Dimensions :
4″ x 4″ x 6″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

4″ Post cap

Caracteristics

Dimensions : 4″ x 4″ x 1″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Stringer 2 steps 2 pieces

Caracteristics

Dimensions :
2″ x 10″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Stringer 3 steps 2 pieces

Caracteristics

Dimensions :
2″ x 10″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Georgian Ball

Caracteristics

Available in the following dimensions : :

3″ x 3″ x 5″
4″ x 4″ x 6″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Bottom Rail

Caracteristics

Available in the following dimensions :

2″ x 4″ x 8′
2″ x 4″ x 12′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Colonial Riser

Caracteristics

Dimensions :
2″ x 3″ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Moulding (End Cap)

Caracteristics

Available in the following dimensions:

1″ x 2″ x 8′
2″ x 2″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Moulding (Nailing Strip)

Caracteristics

Dimensions:
1″ x 1″ x 4′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Pre-Drilled Handrail

Caracteristics

Available in the following dimensions:

2″ x 3″ x 6′
2″ x 4″ x 6′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Colonial Handrail

Caracteristics

Available in the following dimensions:

2″ x 4″ x 8”
2″ x 4″ x 12′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Modern Handrail

Caracteristics

Available in the following dimensions:

2″ x 6″ x 8′
2″ x 6″ x 12′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Colonial Spacer

Caracteristics

Dimensions:

1″ x 1 1/2″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Ball Top Turned Deck Post

Caracteristics

Dimensions:

4″ x 4″ x 48″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Porch Post 6x6x96 Laminated

Caracteristics

Dimensions:

6″ x 6″ x 96″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Porch Post

Caracteristics

Dimensions:

4″ x 4″ x 96″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Ball Top Turned Deck Post Laminated

Caracteristics

Dimensions:
6″ x 6″ x 4′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Stringer 9 steps 2 pieces

Caracteristics

Dimensions:
2″ x 10″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Turned deck post

Caracteristics

Dimensions :
4″ x 4″ x 48″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Modern deck post

Caracteristics

Dimensions :
4″ x 4″ x 48″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

P96

Caracteristics

Dimensions:
4 x 4x 96

Post specially selected to reduce risk of splitting / cracking as well as warping
Eco-friendly ACQ treatment for use above ground with cedar color pigmentation DesignWood approved by Health Canada
Ideal and build for your gallery ramp post and post fence often exposed to the sun
Can be cut to the desired lenght

Special recommandations

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Steps

Caracteristics

Available in the following dimensions:

1 1/2″ x 9 1/4″ x 36″
1 1/2″ x 9 1/4″ x 42″
1 1/2″ x 9 1/4″ x 48″
1 1/2″ x 9 1/4″ x 60″
1 1/2″ x 9 1/4″ x 16′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Stringer 6 steps 2 pieces

Caracteristics

Dimensions:
2″ x 10″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Stringer 5 steps 2 pieces

Caracteristics

Dimensions:
2″ x 10″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Stringer 4 steps 2 pieces

Caracteristics

Dimensions:
2″ x 10″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Framed lattice for fence

Caracteristics

Dimensions: 12″ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Pre-assembled Panel 18 plank

Caracteristics

Dimensions:

6′ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Rounded Fence

Caracteristics

Dimensions:
5′ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Quarter Round

Caracteristics

Dimensions:
1″ x 1″ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Traditionnal Spindle

Caracteristics

Dimensions :
2″ x 2″ x 36″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Colonial spindle 1 ½”

Caracteristics

Dimensions :
2″ x 2″ x 36″
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Baluster Bevelled 2 End 1 1/8×1 3/8

Caracteristics

Available in the following dimensions:

2″ x 2″ x 36″
2″ x 2″ x 42″
2″ x 2″ x 48″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Baluster Bevelled 2 End 1 3/16×1 7/16

Caracteristics

Available in the following dimensions:

2″ x 2″ x 36″
2″ x 2″ x 42″
2″ x 2″ x 48″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Baluster Bevelled 2 End 1 ½ x 1 ½

Caracteristics

Available in the following dimensions:

2″ x 2″ x 36″
2″ x 2″ x 42″
2″ x 2″ x 48″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Fence 4’ Square

Caracteristics

Dimensions:
4′ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Fence 5’ Square

Caracteristics

Dimensions:
5′ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Lattice 1 1/4 Square Heavy Duty

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/8″

Lattice thickness : 3/4″

Size of openings : 1 1/4″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Lattice (Privacy Square) 1 1/4

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/16″

Lattice thickness : 3/8″

Size of openings : 1 1/4″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Lattice (Privacy-Heavy Duty) 1 1/4

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/18″

Lattice thickness : 3/4″

Size of openings : 1 1/4″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Lattice (Standard-Heavy Duty) 2 5/8

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/8″

Slat thickness : 3/4″

Size of openings : 2 5/8″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

2″ X 4″ Moulding (Large Top Rail)

Caracteristics

Dimensions : 2″ x 4″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Lattice (Super-Privacy) 11/16

Caracteristics

Panel size: 4′ x 8′

Slat thickness: 3/16″

Lattice thickness: 3/8″

Size of openings: 11/16″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

2″ X 3″ Moulding (Large Top Rail)

Caracteristics

Dimensions : 2″ x 3″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Lattice (Privacy) 1 1/4

Caracteristics

Panel size: 4′ x 8′

Slat thickness: 3/16″

Lattice thickness: 3/8″

Size of openings: 1 1/4″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

2″ X 2″ Moulding (End cap)

Caracteristics

Dimensions : 2″ x 2″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Lattice (Semi-Privacy) 1 3/4

Caracteristics

Panel size: 4′ x 8′

Slat thickness : 3/16″

Lattice thickness: 3/8″

Size of openings 1 3/4″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

1″ X 2″ Moulding (End Cap)

Caracteristics

Dimensions : 1″ x 2″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product

Regular Lattice

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/16″

Lattice thickness : 3/8″

Sive of openings : 2 5/8″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Use recommended treated wood hardware.
Pre-drilling is recommended to avoid splitting.
Contact with aluminum is not recommended.
Treated Wood products found in Hardware stores are meant for above ground use only.
It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

Where can you buy this product