logo

Fence Panel

Framed lattice for fence

Caracteristics

Dimensions: 12″ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Pre-assembled Panel 18 plank

Caracteristics

Dimensions:

6′ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Rounded Fence

Caracteristics

Dimensions:
5′ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Fence 4’ Square

Caracteristics

Dimensions:
4′ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Fence 5’ Square

Caracteristics

Dimensions:
5′ x 8′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product