Deck Post
Ball Top Turned Deck Post
Caracteristics
Dimensions:
4″ x 4″ x 48″
Available in DesignWood cedar or in green ACQ treated wood
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
Porch Post 6x6x96 Laminated
Caracteristics
Dimensions:
6″ x 6″ x 96″
Available in DesignWood cedar or in green ACQ treated wood
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
Porch Post
Caracteristics
Dimensions:
4″ x 4″ x 96″
Available in DesignWood cedar or in green ACQ treated wood
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
Ball Top Turned Deck Post Laminated
Caracteristics
Dimensions:
6″ x 6″ x 4′
Available in DesignWood cedar or in green ACQ treated wood
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
Turned deck post
Caracteristics
Dimensions :
4″ x 4″ x 48″
Available in DesignWood cedar or in green ACQ treated wood
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
Modern deck post
Caracteristics
Dimensions :
4″ x 4″ x 48″
Available in DesignWood cedar or in green ACQ treated wood
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
P96
Caracteristics
Dimensions:
4 x 4x 96
- Post specially selected to reduce risk of splitting / cracking as well as warping
- Eco-friendly ACQ treatment for use above ground with cedar color pigmentation DesignWood approved by Health Canada
- Ideal and build for your gallery ramp post and post fence often exposed to the sun
- Can be cut to the desired lenght
Special recommandations
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
Available in DesignWood cedar or in green ACQ treated wood
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
Quarter Round
Caracteristics
Dimensions:
1″ x 1″ x 8′
Available in DesignWood cedar or in green ACQ treated wood
Recommandations
DesignWood Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.
P96 (post)
- Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
ACQ Treated wood
- After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
- Use recommended treated wood hardware.
- Pre-drilling is recommended to avoid splitting.
- Contact with aluminum is not recommended.
- Treated Wood products found in Hardware stores are meant for above ground use only.
- It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.
-
Important documents
Limited lifetime warranty ACQ